#Fuel oil ratio for apc mini bike chopper manual

If you know of or remember jump starting a Manual VW Bug this start method is the same. To Start: It's just like riding a bike normally, hold in the clutch and pedal the bike to get some speed, then release the clutch to 'Jump Start' the motor. You can still pedal bike like normal with clutch lever held in or locked in with a button. Answer: The starting and stopping of these two stroke motor kits are this:.Question: How do I start and stop my bike with the 80cc Raw Motor Bicycle Engine?.You should get 100-150 Miles per gallon and achieve 20-40 MPHdepending on climate, altitude, bike weight, and rider weight

Answer: This 2 stroke motor kit requires an Oil And Gas Mixture as follows:Īfter 2 Tanks Of Break-In: 32 to 1 (4oz per Gallon).Question: What fuel do I use for this engine kit?.Answer: This kit will add about 20lbs to your bike.Question: How much weight will this engine kit add to a bike?.

#Fuel oil ratio for apc mini bike chopper how to

How to Install 80cc 66cc 2-Stroke Bicycle Engine Kit

#Fuel oil ratio for apc mini bike chopper free

6-Month Limited Warranty Included - FREE.

All The Mounting Brackets, Gaskets, And Hardware Including Nylon Locking Nuts.

Idler Pulley Chain Tensioner with Bearings.

2.0 Liter Fuel Tank, Tear Drop Shape (Black Color).

Independent drive sprocket and chain does not interfere with your current drive chain and peddling.

25 to 40 mph depending on the gear ratio and weight.

The Motor will require some assembly, the top end of the motor must be installed. This kit gets maximum fuel efficiency stock at around 100 miles per gallon. You will be able to stop or start the engine as you ride.

After Broken in - 32:1 (4 oz of oil per gallon).

New Motor - 16:1 (8 oz of oil per gallon).

Never go less than 32:1 ratio (4oz of oil per Gallon). When the engine is new, it would need to be broken in with a richer mixture, after at least 1 tank of gas, then the mix can be “leaned out” (less oil). Always mix gas in a gas can, not the gas tank. This bike motor kit comes with everything that you'll need except gas and oil since this is a 2 stroke, 2 stroke oil needs to be added to the fuel. The kit will average around 25-35 M.P.H depending on rider weight and rear sprocket gear ratio. When you release the clutch after the bike gets to speed, it push starts the motor. While holding in the clutch, pedal the bike quickly. A second Heavy Duty chain is attached from the motor to the rear wheel via a second sprocket attached to the rear wheel.Ģ stroke motor kits are started by “bump” starting them.

The motor bolts to the bicycle frame in the center of the frame (additional mounting options available). “Looks Cool” on the older beach cruiser type coaster brake bikes. The kit fits best on bikes with 25 to 30mm diameter front down tube and 70 degree Vee type frame like a mountain bike but can be installed on larger diameter tube frames with modifications. How to Install The Top End of a 80cc 66cc 48cc 2-Stroke Bicycle Engine KitĬonvert your bicycle to a motorized bicycle by adding a 2 stroke engine kit to it. NOTE: Top end assembly required for this engine kit.